|
MSX-E3711 - Product specifications
Ethernet system for length measurement, 24-bit, simultaneous, 8 transducers, counter and temperature inputs
The intelligent Ethernet system MSX-E3711 acquires simultaneously the values of 8 LVDT or half-bridge transducers with a resolution of 24-bit and can provide data about temperature and position for each measured value. Therefore the system is adequate on the one hand for quality control in applications that require a temperature reference. On the other hand it can be used for dynamic measurement of surfaces of rotating parts to accelerate the test process.
The system MSX-E3711 withstands everyday impacts like current peaks, vibrations, dirt or extreme temperatures with a robust metal housing and the IP 65 degree of protection. Furthermore, it can be used in the temperature range -40°C / +85°C and it is equipped with numerous protective circuitries. The system can be cascaded through the Ethernet switch and it can be synchronised in the μs range with other systems of the product family, for example with digital I/O or counter function and analog inputs or outputs. Easy error diagnostics is possible with the LED status display.
General features:
- Direct connection of all commercially available transducers (half-bridge or LVDT) Tesa, Solartron, Mahr, Horst Knäbel, Marposs, Schlumberger, Peter&Hirt, RDP, Schaevitz, SMPR Controle
Current list of supported transducers
Further transducers can be calibrated on request
- 8 channels, cascadable
- 24-bit resolution
- 1 incremental counter input
- 1 input for Pt 100 for temperature measurement
- Fast distributed data acquisition
- Example for TESA transducer GT21: Sampling rate: 12.5 kHz per channel, sampling period for a sequence, of 1 to 8 channels: 0.080 ms
- Synchronisation of several systems
- 64 MB onboard SDRAM for storing
- ARM®9 32-bit processor for data processing
- Integrated Ethernet switch
- Cascading of all MSX-E module types
- Cascading of the 24 V supply
- Diagnostic possibility at short-circuits or line break of the transducers
- Robust metal housing
- Degree of protection IP 65
- Power Save mode: reduction of the power consumption when no acquisition runs
- LED status display for fast error diagnostics
You find detailed information about accessories
- in the datasheet
- in the accessories list
|
