Digital input/output board:

PC104-PLUS1500 - Product specifications

Digital input/output board, 32 I/O channels, with optical isolation, 24 V, for PC/104-Plus

The board PC104-PLUS1500 is a digital input/output board (24 V) for use in PC/104-Plus systems.
The input channels correspond to the industrial standard +24 V for "logic 1" for the direct connection to SPS-controls. The 16 optically isolated inputs and outputs are protected against fast transients, electrostatic discharge and high-frequency EMI. These characteristics allow the user to realize interference-free tasks in the industrial PC measurement and control.

• 16 digital inputs, 24 V, isolated, including 2 interuptible inputs
• 16 digital outputs, 24 V, isolated, 11 V to 36 V
• Output current150 mA for each channel
• Optical isolation 1000 V
• Input and output filters
• Creeping distance IEC 61010-1 (VDE4111-1)
• Watchdog for resetting the outputs on "0" (when Power-On)
• Timer
• Counter 
• Protection against fast transients (burst), overvoltage, electrostatic discharge and high-frequency EMI
• Separate ground line for inputs and outputs
• Overtemperature and overvoltage protection
• Diagnostics response at short-circuit, overtemperature, voltage drop
• 24 V power outputs with protective diodes
• Shut-down logic when the external supply voltage drops below 7 V
• Delivered drivers and software samples
• Supported ADDIPACK-functions:
  Digital input, Digital output, Interrupt, Watchdog, Timer, Counter
• Applications:
  - Industrial I/O control
  - SPS connection
  - Signal switching
  - Interface to electromechanical relays
  - Automatic test equipment
  - ON/OFF monitoring of motors, lights,...

Accessories

FB104-1500: Ribbon cable 40-pin on 37-pin SUB-D male connector

PX 901-D:  Screw terminal panel with screws, LED status display
PX 901-DG: Screw terminal panel with screws,  LED status display with housing for DIN-rail
PX 9000: 3-row screw terminal panel with screws for DIN-rail, LED status display

ST010: Standard round cable, shielded, twisted pairs, 2 m

ST011: Standard round cable, shielded, twisted pairs, 5 m

ST010-S:  Same as ST010, for high currents (24 V supply separately)

ST021:   Round cable between FB104-1500 and PX 8500-G,
ST022:   Cable between PX 8500-G and PX 901-DG, shielded, 2 m
ST8500: Ribbon cable for cascading two PX 8500

--------------------------------------------------------------------------------------------------

Any questions? Contact us!