Datasheet (pdf)
Manual (pdf)
Driver
Linux introduction:
Selecting an adequate driver type (pdf)
 
Compatible version for the
CompactPCI-Bus
 

--------------------------

Any questions?

 

 

 
 
Home | Products | PCI boards | 4-port serial

4-port serial interface

APCI-7500-3 / APCI-7500-3/4C - Product specifications

4-port serial interface, RS232, RS422, RS485, 20 mA CL, modular mounting

  • PCI-bus for the universal application in 3.3 V/5 V-systems RS232, RS422, RS485, 20 mA current loop (active, passive) with or without optical isolation
  • Modular structure with MX-modules
  • Each port (MX-module) with or without optical isolation
  • Free mode configuration
  • 128-byte FIFO buffer common interrupt
  • Automatic direction control for RS485
  • RTS/CTS handshake-signals at PS422 as option (MX422-PEP)
  • Transfer mode: Asynchronous, Full-, Half-Duplex
    Transfer rate: Programmable up to 115.2 kBaud on request
  • Protocol: 5-, 6-, 7- or 8-bit character; 1, 1˝ or 2 stop bits
  • Parity: Even, odd, none, characters or blanks
  • Interrupt lines: Automatic through BIOS
  • Drivers for Windows 2000, XP (further on request), operation manual for Linux

 

 

MX-modules: Please order the modules separately!

 

MX232-G: RS232 mode with optical isolation
MX232: RS232 mode
MX422-G: RS422 mode with optical isolation
MX422: RS422 mode

MX422-PEP: RS422 mode with optical isolation, RTS/CTS handshake-signals
MX485-G: RS485 mode with optical isolation
MX485: RS485 mode
MXTTY: 20 mA current loop mode (active, passive) with optical isolation

 

Option:
Opt. Quarz: Up to 1 MBaud transfer rate for RS232, RS422, RS485, 20 mA CL

Accessories:

ST074: Shielded round cable, 37- to 4 x 25-pin

ST075: Shielded round cable, 37- to  4 x 9-pin

----------------------------------------------------------------------------------------------------------

Any questions? Contact us!

 

 

 
back