Datasheet (pdf)
Manual (pdf)
Driver

 
 

Any questions?

 

 
 
Home | Products | PCI boards | Motion Control | APCI-8001

Motion control / PCI

APCI-8001 - Product specifications

 

Axis control for 3 servo or stepper motors

  • For 3 servo or stepper motors
  • Onboard processor
  • Optical isolation
  • 16-bit analog output channels
  • Direct connection of commercially available incremental encoders or SSI absolute encoders
  • Possibility of extension to a total of 8 axes
  • Menu-driven test application
  • Intelligent board based on a 64-bit RISC-processor
  • Positioning of up to 3 axes either with servo or stepping motors. Mixed operation possible
  • for commercially available power amplifiers
  • Linear, circular, helical, spline and CAD interpolation
  • Point to point movement with independent control of each axis
  • All inputs and outputs optically isolated 
  • Multiple axis system possible through cascading
  • Gray code operating user interface
  • Table interpolation
  • Scanner functions for measurement tasks
  • Programming through PC application or stand-alone program

Options

 

OPMF/4A (OPMF/4-STP):  fourth axis -  8 digital inputs and 4 digital outputs in addition, i.e. 4 axes are available

OPMF/5A (OPMF/5-STP):  fifth axis - 16 digital inputs and 8 digital outputs in addition, i.e. 5 axes are available

OPMF/6A (OPMF/6-STP):  sixth axis - 16 digital inputs and 8 digital outputs in addition, i.e. 6 axes are available

From OPMF/7, the FB8001 cable is required

OPMF/7A (OPMF/7-STP):  seventh axis -  24 digital inputs and 12 digital outputs in addition, i.e. 7 axes are available

OPMF/8A (OPMF/-STP):    eighth axis - 24 digital inputs and 12 digital outputs in addition, i.e. 8 axes are available

OPMF-AI12: 4 analog inputs (Option 1-port or 2-port available: max. 8 analog inputs).

OPMF-DIO:   8 digital intpus and 4 digital outputs, isolated.

OPMF-AO:    1 analog output, Option max. 5 times available.

OPT.INTERBUS-8001:  Master connection of the APCI-8001

FB-INTERBUS:  Ribbon cable between OPMF and 9-pin SUB-D male connector with bracket for external INTERBUS connection.

OPT.CAN-8001: CAN bus connection of the APCI-8001 (no CAN Open).

 

Find more detailed information about the OPMF options either in an  information sheet  (pdf) or in the
options manual (pdf).

 

Connection

(Connection example: See data sheet - pdf)

 

FB-CAN: Ribbon cable between OPMF and 9-pin SUB-D female connector with bracket for connecting external INTERBUS.

FB8001:  from the seventh axis (OPMF/7, OPMF/8) or option OPMF-AI12. Ribbon cable between OPMF and a 50-pin SUB-D male connector with bracket

FB RELAY:  For the release of the relays Standard: 9-pin cable with bracket - more than 3 axes: 25-pin cable.

PX 8000: Terminal board with screw terminals with housing for DIN rail

ST8001: Cable for connecting the APCI-8001 and OPMF, 50-pin

FB RELAY_9: Ribbon cable for relase relays: 9-pin SUB-D connector

FBRELAY_25: Ribbon cable for release relays: 25-pin SUB-D connector

Any questions? Contact us!

 

 

 
back