Analog input board, optically isolated:

APCI-3002 - Product specifications

Analog input board, optically isolated, 16 diff. inputs, 16-bit

The APCI-3002 is an analog input board for the PCI-bus. She offers two crucial advantages: The initialisation of a powerful trigger logic allows to acquire analog signals, which depend from time and way, via different  modes. Furthermore, the differential input guarantee the precise acquisition of these signals, although the sensors and process electronics are far away from each other. The measurement board has 16 optically isolated differential inputs with a sampling rate of 200 kHz and 16-bit resolution. Numerous protective measures like overvoltage protection, protection against high frequency emmissions, etc. allow interference-free use in the industrial environment.

• PCI 3.3 V or 5 V
• Optical isolation 1000 V
• 16 differential inputs
• 16-bit resolution
• Sampling rate 200 kHz
• Voltage inputs: 0-10 V, ± 10 V, 0-5 V, ± 5 V, 0-2 V, ± 2V, 0-1 V, ±1 V
• Input voltage freely programmable for each channel
• Current inputs (as option)
• Several input modes for the analog acquisition:
  1) Simple mode
  2) Scan modes
  3) Sequence modes
  4) Auto refresh mode
• Onboard FIFO for 512 analog values 
• PCI-DMA for analog data acquisition
• Digital 24 V I/O instead of TTL
  - 4 digital inputs, 24 V, optically isolated
  - 4 digital outputs (50 mA typ.), 24 V, optically isolated
• Overvoltage protection
• Input filter
• Protection against high frequency emission
• Analog signals separated from digital signals
• 1 timer, 16-bit
• Industry standard 37-pin SUB-D connector
• Customer-tailored modifications designed to suit your needs. Hard- and software, firmware, PLDs, etc. Contact us!
  

APCI-3002: Analog input board, optically isolated, 16 diff. inputs, 16-bit

Option

Please specify the amount and number of channels to be supplied with the required option.

Accessories

(Connection example: see datasheet  - pdf)

PX-BNC: Connection box for the connection of analog voltage and current signals through BNC-connectors

PX 901-AG: Screw terminal panel with transorb diodes for connecting the analog inputs, with housing for DIN rail
PX 901-ZG: Screw terminal panel for connecting the digital I/O for DIN rail

ST010: Standard round cable between PX 901-AG and APCI-3002, shielded, twisted pairs, 2 m
ST011: Standard round cable between PX 901-AG and APCI-3002, shielded, twisted pairs, 5 m
FB3000: Ribbon cable for digital I/O

------------------------------------------------------------------------------------------------

Any questions? Contact us!