Analog input board, optically isolated:

APCI-3010 - Product specifications

Analog input board, optically isolated, 16 SE/8 diff. inputs, 12-bit
with extensive software and hardware functionalities:

PCI-DMA, Auto Refresh, high troughput rate 200 kHz, ...

The  APCI-3010 is a 12-bit analog input board for 3.3 V and 5 V PCI systems, with optical isolation up to 1000 V and a high throughput rate of 200 kHz. The board has additional types of conversion: Sequence RAM, Auto Refresh, scan, timer or external event.

Furthermore, the board has a PCI DMA, 2 watchdogs, 4 digital inputs and 4 digital outputs. Sensors, which allow to supply current signals instead of voltage signals, also can be acquired with the APCI-3010, as this board offers up to 16 current inputs. Further features of the board are overvoltage protection and input filters and it is protected against high frequency emission. With the free calibration tool you can do the fine adjustment on-site.

• PCI 3.3 V or 5 V
• Optical isolation 1000 V
• 16/8/4 single-ended (SE) or 8/4/2 differential inputs
• 12-bit resolution
• Throughput: 200 kHz
• Voltage inputs: 0-10 V, ±10 V, 0-5 V, ±5 V, 0-2 V, ±2 V, 0-1 V, ±1 V
• Input voltage is freely programmable for each channel
• Current inputs: 0-20 mA, as option
• Programmable gain freely programmable for each channel
• Several input modes for analog acquisition:
  1) Simple mode
  2) Scan modes
  3) Sequence modes
  4) Auto refresh mode
• Onboard FIFO (for 512 analog values)
• PCI-DMA for analog data acquisition
• Overvoltage protection, input filter: 225 kHz
• Protection against high frequency emission
• 3 timer/counter, 16-bit
• 2 watchdogs
• 4 digital inputs, 24 V, optically isolated
• 4 digital outputs, 24 V, optically isolated
• 24 TTL inputs and outputs
• Industry standard 37-pin SUB-D connector
• Customer-tailored modifications designed to suit your needs. Hard- and software, firmware, PLDs etc. Contact us!

Versions

APCI-3010-16: 16 SE/8 diff. inputs, 12-bit
APCI-3010-8: 8 SE/8 diff. inputs, 12-bit

APCI-3010-4: 4 SE/2 diff. inputs, 12-bit

Options

OPT.DF: Precision filter for 1 diff. channel
OPT.PC: Current input 0(4)-20 mA for 1 channel (OPT. PC-SE: for Single-Ended, OPT. PC-DIFF: for differential), OPT.SF: Precision filter for 1 SE-channel
Please specify the amount and numbers of channels to be supplied with the required option.

Accessories

Connection example: See datasheet (pdf)

PX-BNC: Connection box for the direct connection of analog voltage and current signals through BNC connectors.

PX 901-AG:  Screw terminal panel with transorb diodes with screws with housing for DIN rail for connectiong the analog inputs
ST010: Standard round cable between PX 901-AG and APCI-3010, shielded, twisted pairs, 2 m
ST011: Standard round cable between PX 901-AG and APCI-3010, shielded, twisted pairs, 5 m
PX 8000: Screw terminal panel for DIN rail for connecting the digital I/O, timer and counter

FB8001: Ribbon cable for digital I/O

ST370-16:  Shielded round cable between screw terminal panel  PX 8000 and APCI-3010, 50-pin, twisted pairs, 2 m

-------------------------------------------------------------------------------------------------

Any questions? Contact us!