Multifunction board:

APCI-3100 - Product specifications

Multifunction board, 16 SE/8 diff. inputs, 4 analog outp., 12-bit

The  APCI-3100 is a 12-bit multifunction board for 3.3 V and 5 V PCI systems, without optical isolation. The values can be processed through software, scan, timer or external event.

With the free calibration tool you can do the fine adjustment on-site.

• PCI 3.3 V or 5 V
• 16/8 single-ended (SE) or 8/4 differential inputs
• 12-bit resolution
• Throughput: 100 kHz
• Voltage inputs: 0-10 V, ±10 V, 0-5 V, ±5 V, 0-2 V, ±2 V, 0-1 V, ±1 V
• Input voltage is freely programmable for each channel
• Programmable gain freely configurable for each channel
• Several input modes for analog acquisition:
  1) Simple mode
  2) Scan modes
• Onboard FIFO (for 512 analog values)
• Overvoltage protection
• Input filter
• Protection against high frequency emmission
• 3 timer/counter, 16-bit
• 4 analog outputs, 12-bit
• 24 TTL inputs and outputs (3 ports with each 8 channels)
• Industry standard 37-pin SUB-D connector

APCI-3100: Multifunction board, 16 SE/8 diff. inputs, 4 analog outp., 12-bit

Versions

APCI-3100-16: 16 SE/8 diff. inputs, 12-bit
APCI-3100-8: 8 SE/8 diff. inputs, 12-bit

Accessories

Connection example: See datasheet (pdf)

PX_BNC: Connection box for the direct connection of analog voltage and current signals through BNC connectors.

PX901-AG:  Screw terminal panel with transorb diodes with screws with housing for DIN rail for connecting the analog inputs
ST010: Standard round cable between PX901-AG and APCI-3100, shielded, twisted pairs, 2 m
ST011: Standard round cable between PX901-AG and APCI-3100, shielded, twisted pairs, 5 m
PX8000: Screw terminal panel for DIN rail for connecting the digital I/O, timer and counter

FB8001: Ribbon cable for digital I/O

ST370-16:  Shielded round cable between screw terminal panel  PX 8000 and APCI-3100, 50-pin, twisted pairs, 2 m