Multifunction board, optically isolated:

APCI-3110 - Product specifications

Multifunction board, optically isolated, 16 SE/8 diff. inputs, 4 analog outp., 12-bit
with extensive software and hardware functionalities:

PCI-DMA, Auto Refresh, high troughput rate 200 kHz, ...

The  APCI-3110 is a 12-bit multifunction board for 3.3 V and 5 V PCI systems, with optical isolation up to 1000 V and a high throughput rate of 200 kHz. The PCI board has additional types of conversion: Sequence RAM, Auto Refresh, scan, timer or external event.

Furthermore, the board has a PCI DMA, 2 watchdogs, 4 digital inputs and 4 digital outputs. Sensors, which allow to supply current signals instead of voltage signals, also can be acquired with the APCI-3010, as this board offers up to 16 current inputs. The board is protected against overvoltage and input filter and it is protected against high frequency emmission. With the free calibration tool you can do the fine adjustment on-site.

• PCI 3.3 V or 5 V
• Optical isolation 1000 V
• 16/8/4 single-ended (SE) or 8/4/2 differential inputs
• 12-bit resolution
• Throughput: 200 kHz
• Voltage inputs: 0-10 V, ±10 V, 0-5 V, ±5 V, 0-2 V, ±2 V, 0-1 V, ±1 V
• Input voltage is freely programmable for each channel
• Current inputs: 0-20 mA, as option
• Programmable gain freely configurable for each channel
• Several input modes for analog acquisition:
  1) Simple mode
  2) Scan modes
  3) Sequence modes
  4) Auto refresh mode
• Onboard FIFO (for 512 analog values)
• PCI-DMA for analog data acquisition
• Overvoltage protection
• Input filter
• Protection against high frequency emission
• 3 timer/counter, 16-bit
• 2 watchdogs
• 4 or 8 analog outputs, 12-bit
• 4 digital inputs, 24 V, optically isolated
• 4 digital outputs, 24 V, optically isolated
• 24 TTL inputs and outputs (3 ports with each 8 channels)
• Industry standard 37-pin SUB-D connector
• Tailor-made modifications designed to suit your needs. Hard- and software, firmware, PLDs etc. Contact us!

Versions

APCI-3110-16: 16 SE/8 diff. inputs, 4 analog outp. 12-bit
APCI-3110-8: 8 SE/4 diff. inputs, 4 analog outp., 12-bit

Options

OPT.DF: Precision filter for 1 diff. channel
OPT.PC: Current input 0(4)-20 mA for 1 channel (OPT.PC-SE: for Single-Ended, OPT.PC-DIFF: for differential), OPT.SF: Precision filter for 1 SE-channel

Please specify the amount and numbers of channels to be supplied with the required option.

Accessories

Connection example: See datasheet (pdf)

PX-BNC: Connection box for the direct connection of analog voltage and current signals through BNC connectors.

PX 901-AG:  Screw terminal panel with transorb diodes with screws with housing for DIN rail for connecting the analog inputs
ST010: Standard round cable between PX 901-AG and APCI-3110, shielded, twisted pairs, 2 m
ST011: Standard round cable between PX 901-AG and APCI-3110, shielded, twisted pairs, 5 m
PX 8000: Screw terminal panel for DIN rail for connecting the digital I/O, timer and counter

FB8001: Ribbon cable for digital I/O

ST370-16:  Shielded round cable between screw terminal panel  PX 8000 and APCI-3110, 50-pin, twisted pairs, 2 m

----------------------------------------------------------------------------------------------------

Any questions? Contact us!