- Generated on Tue Oct 13 2015 12:40:12 for xPCI-3501 API by
1.8.7
|
xPCI-3501 API
|
Functions | |
| _INT_ | i_PCI3501_Read1DigitalInput (HANDLE h_DeviceHandle, BYTE b_Channel, PBYTE pb_Value) |
| _INT_ | i_PCI3501_Read2DigitalInputs (HANDLE h_DeviceHandle, PBYTE pb_Value) |
| _INT_ | i_PCI3501_Set1DigitalOutputOn (HANDLE h_DeviceHandle, BYTE b_Channel) |
| _INT_ | i_PCI3501_Set1DigitalOutputOff (HANDLE h_DeviceHandle, BYTE b_Channel) |
| _INT_ | i_PCI3501_Set2DigitalOutputsOn (HANDLE h_DeviceHandle, BYTE b_Mask) |
| _INT_ | i_PCI3501_Set2DigitalOutputsOff (HANDLE h_DeviceHandle, BYTE b_Mask) |
| _INT_ | i_PCI3501_SetDigitalOutputMemoryOn (HANDLE h_DeviceHandle) |
| _INT_ | i_PCI3501_SetDigitalOutputMemoryOff (HANDLE h_DeviceHandle) |
| _INT_ | i_PCI3501_Get1DigitalOutputStatus (HANDLE h_DeviceHandle, BYTE b_Channel, PBYTE pb_OutputsStatus) |
| _INT_ | i_PCI3501_Get2DigitalOutputsStatus (HANDLE h_DeviceHandle, PBYTE pb_OutputsStatus) |
| _INT_ i_PCI3501_Read1DigitalInput | ( | HANDLE | h_DeviceHandle, |
| BYTE | b_Channel, | ||
| PBYTE | pb_Value | ||
| ) |
Read 1 digital input of the board
| [in] | h_DeviceHandle | Handle of the board |
| [in] | b_Channel | Channel to read (0 to 1) |
| [out] | pb_Value | Status of the digital input |
| 0 | : No Error |
| -1 | : Invalid channel |
| -2 | : Error while calling IOCTL function (wrong handle ?) |
| _INT_ i_PCI3501_Read2DigitalInputs | ( | HANDLE | h_DeviceHandle, |
| PBYTE | pb_Value | ||
| ) |
Read the 2 digital inputs of the board
| [in] | h_DeviceHandle | Handle of the board |
| [out] | pb_Value | Status of the digital inputs |
| 0 | : No Error |
| -1 | : Error while calling IOCTL function (wrong handle ?) |
| _INT_ i_PCI3501_Set1DigitalOutputOn | ( | HANDLE | h_DeviceHandle, |
| BYTE | b_Channel | ||
| ) |
Set 1 digital output of the board to HIGH
| [in] | h_DeviceHandle | Handle of the board |
| [in] | b_Channel | Channel to set (0 to 3) |
| 0 | : No Error |
| -1 | : Wrong channel |
| -3 | : Error while calling IOCTL function (wrong handle ?) |
| _INT_ i_PCI3501_Set1DigitalOutputOff | ( | HANDLE | h_DeviceHandle, |
| BYTE | b_Channel | ||
| ) |
Set 1 digital output of the board to LOW
| [in] | h_DeviceHandle | Handle of the board |
| [in] | b_Channel | Channel to reset (0 to 3) |
| 0 | : No Error |
| -1 | : Wrong channel |
| -3 | : Error while calling IOCTL function (wrong handle ?) |
| _INT_ i_PCI3501_Set2DigitalOutputsOn | ( | HANDLE | h_DeviceHandle, |
| BYTE | b_Mask | ||
| ) |
Set the digital outputs set in the mask to HIGH
| [in] | h_DeviceHandle | Handle of the board |
| [in] | b_Mask | Channels to set (0x0 to 0x3) |
| 0 | : No Error |
| -1 | : Wrong mask |
| -3 | : Error while calling IOCTL function (wrong handle ?) |
| _INT_ i_PCI3501_Set2DigitalOutputsOff | ( | HANDLE | h_DeviceHandle, |
| BYTE | b_Mask | ||
| ) |
Set the digital outputs set in the mask to LOW
| [in] | h_DeviceHandle | Handle of the board |
| [in] | b_Mask | Channels to reset (0x0 to 0x3) |
| 0 | : No Error |
| -1 | : Wrong mask |
| -3 | : Error while calling IOCTL function (wrong handle ?) |
| _INT_ i_PCI3501_SetDigitalOutputMemoryOn | ( | HANDLE | h_DeviceHandle | ) |
Enable the digital output memory
When digital output memory is enabled, the active channels stay active until calling i_PCI3501_Set1DigitalOutputOff or i_PCI3501_Set4DigitalOutputsOff.
When digital output memory is disabled, the active channels are reset at each call of i_PCI3501_Set1DigitalOutputOn or i_PCI3501_Set4DigitalOutputsOn.
| [in] | h_DeviceHandle | Handle of the board |
| 0 | : No Error |
| -1 | : Error while calling IOCTL function (wrong handle ?) |
| _INT_ i_PCI3501_SetDigitalOutputMemoryOff | ( | HANDLE | h_DeviceHandle | ) |
Disable the digital output memory
When digital output memory is enabled, the active channels stay active until calling i_PCI3501_Set1DigitalOutputOff or i_PCI3501_Set4DigitalOutputsOff.
When digital output memory is disabled, the active channels are reset at each call of i_PCI3501_Set1DigitalOutputOn or i_PCI3501_Set4DigitalOutputsOn.
| [in] | h_DeviceHandle | Handle of the board |
| 0 | : No Error |
| -1 | : Error while calling IOCTL function (wrong handle ?) |
| _INT_ i_PCI3501_Get1DigitalOutputStatus | ( | HANDLE | h_DeviceHandle, |
| BYTE | b_Channel, | ||
| PBYTE | pb_OutputsStatus | ||
| ) |
Get the status of 1 digital output of the board
| [in] | h_DeviceHandle | Handle of the board |
| [in] | b_Channel | Channel to get (0 to 3) |
| [out] | pb_OutputsStatus | Status of the digital output |
| 0 | : No Error |
| -1 | : Wrong channel |
| -2 | : Error while calling IOCTL function (wrong handle ?) |
| _INT_ i_PCI3501_Get2DigitalOutputsStatus | ( | HANDLE | h_DeviceHandle, |
| PBYTE | pb_OutputsStatus | ||
| ) |
Get the status of all the digital outputs of the board
| [in] | h_DeviceHandle | Handle of the board |
| [out] | pb_OutputsStatus | Status of the digital output |
| 0 | : No Error |
| -1 | : Error while calling IOCTL function (wrong handle ?) |
1.8.7