APCI-3200 – DAQ PCI Card – Temperature measurement
The PCI temperature measurement card APCI-3200 has 16/8/4 channels for thermocouples or 8 inputs for resistance temperature detectors (RTD). Each channel can be configured either to thermocouples, RTD or as an analog voltage input channel. Furthermore, the board has 8 independent current sources for resistance temperature detectors (RTD) and one current source for the cold junction compensation.
Get a quoteDescription
Features
- PCI 3.3 V or 5 V
- 18-bit resolution, 16-bit accuracy
- Each channel can be configured either to thermocouples, RTD or as an analog voltage input channel
– 16 analog inputs for thermocouple types
J, K, T, E, R, S, B, N
– or 8 diff. analog inputs for the acquisition of the
resistance temperature detectors (Pt100)
– or 16 SE/8 differential analog voltage inputs, ± 1.25 V - 8 independent current sources for resistance temperature detectors (RTD) and one current source for the cold junction compensation
- Cold junction compensation (on separate screw terminal panel)
- Gain and offset calibration
- Linearisation through table and calculation for thermocouple types J, K, T, E, R, S, B, N and RTDs
- Programmable gain
- 16-bit accuracy with converter sample rate of 20, 40, 80 or 160 Hz (higher sample rate on request)
- 4 digital inputs, 24 V and 3 digital outputs, open collector, optically isolated
- Base address and IRQ channels set through BIOS
Safety features
- Optical isolation 1000 V
- Creeping distance IEC 61010-1
- Diagnostic: Short-circuits- and line break detection, depending on the type of sensor used
- Protection against overvoltage (±30 V) and high-frequency EMI
Software
Standard drivers and samples for:
- Linux
- Windows (32/64)
- Real-time with Linux (i.e Xenomai) and Windows (i.e RTX) on request
On request:
Further operating systems, compilers and samples. Driver download: www.addi-data.com/downloads
DOWNLOADS
Drivers
64-bit drivers for Windows 11/10/8/7/Vista/XP and Linux as well as programming samples are included, real-time drivers for Windows and Linux are available on request.
For Windows For Linux
Datasheets
English version French version German version
Manuals
English version German versionAPPLICATIONS
Measurement tasks in a coal power plant
A coal power plant needs to detect the energy loss occurring in different areas of the power plant in order to minimize the energy loss and optimize the energy production process.
Temperature and humidity measurement
Learn how to monitor and control temperature and air humidity in real time.
