• 32-bit data access
• Up to 40 MHz input frequency
• Signals in TTL or RS422 mode (CPCI-1712), 24 V signals (CPCI-1712-24V)
• 4 on board FPGAs
• Software reprogrammable FPGA functions

Functions

• Incremental counter for the acquisition of incremental encoders (90°phase-shifted signals)
• SSI Synchronous Serial Interface. The SSI function is an interface for systems which allow an absolute position information via serial data transfer
• BiSS-C
• Counter/timer (82C54)
• Pulse acquisition
• Frequency measurement
• Pulse width modulation (PWM)
• Period duration measurement
• Velocity measurement
• Digital inputs and outputs
• Edge time measurement (ETM)
• Customised functions

Available channels for all four function modules

• 20 channels for digital inputs, optically isolated
• 8 channels, programmable either as digital inputs or outputs, optically isolated
• 4 digital power outputs, optically isolated

Available lines for each function module

8 lines are available for each function module

• Input lines:
  • 2 x TTL and RS422 (CPCI-1712)
    or 2 x 24 V (CPCI-1712-24V)
  • 3 x 24 V, optional 5 V for channels E, F, G
• Output lines:
  • 1 x 24 V, optional 5 V (power output)
• 2 channels, programmable either as digital inputs or outputs, optically isolated: 2 x TTL, RS422
• Galvanic Isolation (Inputs) 1000V

Applications

• Event and batch counting
• Position and speed acquisition
• Encoder feedback and motion control
• Conveyor tracking and synchronization
• Vision system triggering
• Production monitoring and quality control
• Frequency and pulse measurement

Software drivers

Standard drivers for:

• Linux
• 64 bits Windows 7 / 8 / 10 / 11
• On Request : RTX, Xenomai, VxWorks, QNX

Supported Drivers Languages:

• C/C++
• Python
• .NET
• Other on Request

On request:

Documentation and developer resources.

The software functions can be adapted to your applications on request. The board can also be implemented for
other software applications.

The post <h1 style="font-family: Futura; font-size: 26px;">CPCI-1712 – DAQ PCI Card – Counting Inputs</h1> appeared first on ADDI-DATA.

• Asynchronous communication adapter
• Modular mounting through SI modules: 4 sockets for 4-port serial interface
• Can be configured as RS232, RS422, RS485, 20 mA
  Current Loop (active, passive), with optical isolation through separate SI modules
• Automatic addressing through BIOS
• Automatic module identification
• UART 16C950, downward compatible to 16C450
• 128-byte FIFO buffer for sending and receiving data
• Programmable transfer rate
• 5-, 6-, 7- or 8-bit character
• 1, 1½ or 2 stop bits
• Parity: even, odd or none
• Automatic transmitter control for RS485 and transmitter control through FIFO level
• Common interrupt

Safety features

• SI modules with optical isolation 1000 V
• Creeping distance IEC 61010-1 (VDE411-1)
• Protection against fast transients (Burst)
• Short-circuit protection for RS422 and RS485
• Internal diagnostic possibility, break, parity, overrun and framing error

Applications

• Industrial serial communication
• Data acquisition
• Multi-user systems
• PLC interface
• Multidrop applications
• Modem and printer control, etc

Software drivers

Standard drivers for:

• Linux
• 64 bits Windows 7 / 8 / 10 / 11
• On Request : RTX, Xenomai, VxWorks, QNX

Supported Drivers Languages:

• C/C++
• Python
• .NET
• Other on Request

On request:

Documentation and developer resources.

The software functions can be adapted to your applications on request. The board can also be implemented for
other software applications.

The post <h1 style="font-family: Futura; font-size: 26px;">CPCIs-7500* – DAQ CPCIs Card – Serial communication</h1> appeared first on ADDI-DATA.

Platform

Computing

• AI-ready industrial platform
• Intel® Core i3 / i5 / i7 / i9 processors (10th to 14th gen) and
  Intel® Xeon® CPUs (10th to 14th gen)
• Up to 64 GB DDR5 / DDR4 RAM
• 3 PCI, PCIe ports
• Optional GPU for AI inference & image processing
• Windows 11 IoT & Linux support
• Real-Time Operating Systems Options (Xenomai, RTX etc…)

DAQ Capabilities (ADDI-DATA Ecosystem)

• Full ADDI-DATA DAQ portfolio support
• Single driver & API : ADDI-PACK
• Hardware abstraction & long-term software stability
• Deterministic, and synchronous
• Hard Real-Time DAQ Drivers

System Monitoring

• Watchdog & supervision boards

Sensor interfaces & Measurement

Analog Sensors 

• Voltage & current (±10 V, 0–10 V, 0/4–20 mA)
• IEPE / ICP® sensors (vibration, acceleration)
• Strain gauges & bridge sensors (full / half / quarter bridge)
• Thermocouples (J, K, T, N, E, R, S, B)
• RTDs (PT100 / PT1000)
• Transducers
• DMS
• LVDT
• Knäbel VLDT (Mahr)
• Resistance & potentiometric sensors typo

Digital Sensors

• Up to 24 V digital inputs & outputs (optically isolated)
• TTL / CMOS digital I/O
• Event-based & interrupt-driven signals
• Pulse, frequency & duty-cycle measurement
• Digital Transducers

Position, Motion & Counting

• Incremental encoders
• Absolute encoders
  • SSI
  • BiSS (B / C mode)
  • EnDat 2.2
• Sin/Cos encoders
• High-speed counters & timers
• Pulse, frequency, period & speed measurement
• PWM measurement & generation
• Edge time measurement (ETM)
• Position compare
• Parallel position interfaces

Serial & Differential Sensor Interfaces

• RS-422
• RS-485
• RS-232
• TTY
• Proprietary or custom synchronous serial protocols

Smart & Bus-Based Sensors

• Fieldbus-connected sensors via communication cards:
  • PROFINET
  • PROFIBUS
  • EtherCAT
  • CAN / CANopen
  • Modbus (RTU / TCP)

Ethernet Distributed Data Acquisition (MSX-E)

• Distributed analog, digital & counter I/O modules
• Distributed also encoder, counting & motion interfaces
• Deterministic acquisition and real-time triggering at machine level
• Local signal preprocessing close to sensors and actuators
• Rugged IP65 MSX-E DAQ Ecosystem Support

Measurable Physical Quantities

• Temperature (contact & contact-free)
• Pressure & vacuum
• Force, load & torque
• Strain & deformation
• Position & displacement (linear / angular)
• Distance, gap & thickness
• Speed & velocity
• Acceleration & vibration
• Rotation & RPM
• Pulse, frequency & period
• Event, cycle & object counting
• Time & edge timing
• Flow & level (liquid / gas)
• Light intensity & optical detection
• Presence / absence
• Electrical quantities (voltage, current, power)
• Humidity & moisture
• Process & quality indicators (OK/NOK, defects, throughput)

Service and Options

Modules & Add-Ons

• RAID configurations
• SATA / NVMe storage expansion
• PCI/PCIe port expansion

Services 

• Long-term availability (20+ years)
• Hardware & software migration support
• Retrofitted code adaptation or functional reimplementation
• Single point of responsibility for IPC, DAQ Cards and Software

On request

• Extended temperature range
• CPCI/CPCIs
• Custom Software Integration
• External power supply

The post <h1 style="font-family: Futura; font-size: 26px;">MSX-BOX-IPC-2 – Deterministic PCI/PCIe Data Acquisition Platform for Real-Time Edge Systems</h1> appeared first on ADDI-DATA.

Features

Power supply

• Nominal voltage: 18 V – 36 V

Resolver output/input

• Frequency: 10 kHz

Incremental encoder output

• Output signals: incremental A+, A-, B+, B-, Index+, Index-
• Output type: differential, RS422
• Resolution: 10-/12-/14-/16-bit

Power supply connector

For the power supply of the MSX-RDC-17_24V, a 4-pin screw terminal is fixed on the bottom side of the housing. The Ground and the supply pins are connected internally with each other. For less current flow over the terminals, please connect all four pins externally with each other!

Resolver connector

The resolver has to be connected to the 9-pin D-Sub female connector on the front side of the MSX-RDC-17_24V.

Switch

On the front side of the MSX-RDC-17_24V, a switch panel with three switches is installed. Switches 1 and 2 are used for setting the resolution of the incremental encoder output. Switch 3 allows you to reset the MSX-RDC-17_24V. To do a reset, you have to switch on switch 3 for a short time and then switch it off again. Please do not leave switch 3 switched on permanently, because the MSX-RDC-17 is not functional with this switch position!

Incremental encoder output

The incremental encoder signals are available at the 9-pin D-Sub male connector of the MSX-RDC-17_24V.

Environmental conditions

• Operating temperature: 0-60°C (with forced ventilation)
• Storage temperature: -25°C to +70°C
• Relative air humidity at indoor installation: 50% at +40°C | 80% at +31°C

Index signal (incremental encoder output)

An Index pulse is generated when the absolute angular position passes through 0.

Intended use

The resolver-to-digital converter MSX-RDC-17_24V has to be used as electrical equipment for measurement, control and laboratory pursuant to the standard DIN EN IEC 61010-1. The power supply for the resolver-to-digital converter MSX-RDC-17_24V must fulfil the requirements of DIN EN IEC 62368-1 and DIN EN 55032 or IEC/CISPR 32
and DIN EN 55024 or IEC/CISPR 24.

Usage restrictions

The resolver-to-digital converter MSX-RDC-17_24V must not be used as a safety-related part (SRP).
The resolver-to-digital converter MSX-RDC-17_24V must not be used for safety-related functions, for example for emergency stop functions.
The resolver-to-digital converter MSX-RDC-17_24V must not be used in potentially explosive atmospheres.
The resolver-to-digital converter MSX-RDC-17_24V must not be used as electrical equipment according to the Low Voltage Directive 2014/35/EU.

Limits of use

All safety information and the instructions on this datasheet must be followed to ensure proper intended use. Uses of the resolver-to-digital converter beyond these specifications are considered as improper use. The manufacturer is not liable for damages resulting from improper use. The resolver-to-digital converter must remain in its anti-static packaging until it is installed. Please do not delete the identification numbers of the resolver-to-digital converter or the warranty claim will be invalid

The post <h1 style="font-family: Futura; font-size: 26px;">MSX-RDC-17_24V – Resolver-to-digital converter</h1> appeared first on ADDI-DATA.

• 3 programmable timers
• Connector and software compatible to the digital I/O boards APCI-1500 for the PCI bus and CPCI-1500 for the CompactPCI bus
• Connector compatible to the ISA board PA 1500
• Monitoring program for testing and setting the board functions

Inputs:

• 16 optically isolated digital inputs, 12 V, including 14 interruptible inputs
• Reverse voltage protection
• All inputs are filtered

Outputs:

• 16 optically isolated digital outputs, 10 V to 36 V
• Output current per channel 500 mA
• Timer programmable watchdog for resetting the outputs to „0“
• Diagnostic report through status register at shortcircuits, overtemperature, voltage drop or watchdog
• Interrupt triggered through watchdog, timer, error
• At Power-On, reset of the outputs to „0”
• Short-circuit current for 16 outputs ~ 3 A typ
• Short-circuit current per output ~1.5 A typ.
• Self-resetting fuse (electronic fuse)
• Overtemperature and overvoltage protection
• 24 V power outputs with protection diodes and filters
• Output capacitors against electromagnetic emissions
• External 24 V voltage supply screened and filtered
• Shutdown logic, when the external supply voltage drops below 5 V

Safety features

• Optical isolation 1000 V
• Creeping distance IEC 61010-1
• Protection against fast transients (burst), overvoltage, electrostatic discharge and high-frequency EMI
• Separate ground lines for inputs and outputss

Applications

• Industrial I/O control
• PLC coupling
• Reading of encoder values for process control
• Signal switching
• Interface to electromechanical relays
• ON/OFF monitoring of motors, lights…
• Watchdog timer • Interface to machines

Software

A CD-ROM with the following software and programming samples is supplied with the board.

Standard drivers for:

• Linux
• Signed 64-bit drivers for Windows 8 / 7 / XP
• Real-time use with Linux and Windows on request

drivers and samples for the following compilers and software packages:

• .NET
• Microsoft VC++ • Borland C++
• Visual Basic • Delphi
• LabVIEW • LabWindows/CVI • DIAdem

On request:

Further operating systems, compilers and samples. Driver download: www.addi-data.com/downloads

The post <h1 style="font-family: Futura; font-size: 26px;">APCIe-1500-12V</h1> appeared first on ADDI-DATA.

• PCI 3.3 V

Relays

• 8 or 16 electromechanical relays with change-over contacts
• Max. switching voltage for the relays: 60 VDC, 48 VAC
• Max. switching capacity: 30 W, max. 1 A
• Short response time
• Watchdog: switched on/off through software

Digital inputs

• 8 inputs, optically isolated
• Input voltage: 12-24 V (DC)

Safety features

• EMC tested
• Watchdog activity can be read back
• Optical isolation of the relays
• Creeping distance IEC 61010-1

Applications

• Signal switching
• Industrial digital I/O controlling
• Interface to electromechanical relays
• Automatic test equipment
• ON/OFF monitoring of motors, lights…
• Alarm monitoring
• Machine interfacing, …

Software drivers

Standard drivers and samples for:

• Linux
• Windows (32/64)
• Real-time with Linux (i.e Xenomai) and Windows (i.e RTX) on request

On request:

Further operating systems, compilers and samples. Driver download: www.addi-data.com/downloads

The post <h1 style="font-family: Futura; font-size: 26px;">APCI-2200-8-8_3,3V – DAQ PCI Card – Relay Outputs</h1> appeared first on ADDI-DATA.

• 32 digital outputs, 5 V version, optically isolated
• Output current per channel 500 mA
• Voltage range: 10 V to 36 V
• Diagnostic report, through status register at shortcircuits, overtemperature, voltage drop or watchdog
• Programmable watchdog for resetting the outputs to “0“, function release through software
• Interrupt triggered through error
• At Power-On, the outputs are reset to “0”

Safety features

• Optical isolation 1000 V
• Creeping distance IEC 61010-1
• Protection against fast transients (burst), overvoltage, electrostatic discharge and high-frequency EMI
• Maximum output current for 32 outputs 6 A typ. (2 x 3 A)
• Short-circuit current per output ~ 1.5 A typ.
• Self-resetting fuse (electronic fuse)
• 24 V power outputs with protection diodes and filters
• Output capacitors against electromagnetic emissions
• External 24 V voltage supply screened and filtered
• Fast demagnetisation in case of inductive loads
• Diagnostic function for detecting short-circuits and overtemperature

Applications

• Signal switching
• Interface to electromechanical relays
• Automatic test equipment
• ON/OFF monitoring of motors, lights…
• Watchdog timer
• Machine interfacing, …

Software drivers

Standard drivers and samples for:

• Linux
• Windows (32/64)
• Real-time with Linux (i.e Xenomai) and Windows (i.e RTX) on request

On request:

Further operating systems, compilers and samples. Driver download: www.addi-data.com/downloads

The post <h1 style="font-family: Futura; font-size: 26px;">APCI-2032-5 – DAQ PCI Card – Digital Outputs</h1> appeared first on ADDI-DATA.

• 3 programmable timers
• Connector compatible to the ISA board PA 1500. Connector and software compatible to the digital I/O boards APCIe-1532 for the PCI Express bus and CPCI-1500 for the CompactPCI bus.
• Monitoring program for testing and setting the board functions

Inputs

• 16 optically isolated digital inputs, 12 V, including 14 interruptible inputs
• Reverse voltage protection
• All inputs are filtered

Outputs

• 16 optically isolated digital outputs, 10 V to 36 V
• Output current per channel 500 mA
• Timer programmable watchdog for resetting the outputs to „0“
• Diagnostic report through status register at shortcircuits, overtemperature, voltage drop or watchdog
• Interrupt triggered through watchdog, timer, error
• At Power-On, reset of the outputs to „0”
• Short-circuit current for 16 outputs ~ 3 A typ.
• Short-circuit current per output ~1.5 A typ
• Self-resetting fuse (electronic fuse)
• Overtemperature and overvoltage protection
• 24 V power outputs with protection diodes and filters
• Output capacitors against electromagnetic emissions
• External 24 V voltage supply screened and filtered
• Shutdown logic, when the external supply voltage drops below 5 V

Safety features

• Optical isolation 1000 V
• Creeping distance IEC 61010-1
• Protection against fast transients (burst), overvoltage, electrostatic discharge and high-frequency EMI
• Separate ground lines for inputs and outputs

Applications

• Industrial I/O control
• PLC coupling
• Reading of encoder values for process control
• Signal switching
• Interface to electromechanical relays
• Automatic test equipment
• ON/OFF monitoring of motors, lights…
• Watchdog / Timer
• Machine interfacing

Software drivers

Standard drivers and samples for:

• Linux
• Windows (32/64)
• Real-time with Linux (i.e Xenomai) and Windows (i.e RTX) on request

On request:

Further operating systems, compilers and samples. Driver download: www.addi-data.com/downloads

The post <h1 style="font-family: Futura; font-size: 26px;">APCI-1500-12V – DAQ PCI Card – Digital Inputs/Outputs</h1> appeared first on ADDI-DATA.

• 32 optically isolated digital inputs, 5 V, including 16 interruptible inputs

Safety features

• Optical isolation 1000 V
• Creeping distance IEC 61010-1
• Reverse voltage protection
• All inputs are filtered
• Protection against fast transients (burst), overvoltage, electrostatic discharge and high-frequency EMI
• Additional noise suppression on the interrupt lines

Applications

• Industrial I/O control
• Signal switching
• Interface to electromechanical relays
• Automatic test equipment
• ON/OFF monitoring of motors, lights…
• Machine interfacing

Software drivers

Standard drivers and samples for:

• Linux
• Windows (32/64)
• Real-time with Linux (i.e Xenomai) and Windows (i.e RTX) on request

On request:

Further operating systems, compilers and samples. Driver download: www.addi-data.com/downloads

s for:

The post <h1 style="font-family: Futura; font-size: 26px;">APCI-1032-5 – DAQ PCI Card – Digital Inputs</h1> appeared first on ADDI-DATA.

• Connector and software compatible to the digital output board APCI-2023 for the PCI bus
• 32 digital outputs, 5 V version, optically isolated
• Output current per channel: 500 mA
• Voltage range: 10 V to 36 V
• Diagnostic report, through status register at shortcircuits, overtemperature, voltage drop or watchdog
• Programmable watchdog for resetting the outputs to “0“, function release through software
• Interrupt triggered through error
• At Power-On the outputs are reset to “0“

Safety features

• Optical isolation 1000 V
• Creeping distance IEC 61010-1
• Protection against fast transients (burst), overvoltage, electrostatic discharge and high-frequency EMI
• Maximum output current for 32 outputs 6 A typ. (2 x 3 A)
• 24 V power outputs with protection diodes and filters
• Self-resetting fuse (electronic fuse)
• Short-circuit current per output 1.5 A typ.
• Output capacitors against electromagnetic emissions
• Fast demagnetisation in case of inductive loads
• External 24 V voltage supply screened and fi ltered
• Shutdown logic: If the external 24 V voltage drops below 5 V, then the outputs are switched off.

Applications

• Signal switching
• Interface to electromechanical relays
• Automatic test equipment
• ON/OFF monitoring of motors, lights…
• Watchdog timer • Machine interfacing

Software

Standard drivers and samples for:

• Linux
• Windows (32/64)
• Real-time with Linux (i.e Xenomai) and Windows (i.e RTX) on request

On request:

Further operating systems, compilers and samples. Driver download: www.addi-data.com/downloads

The post <h1 style="font-family: Futura; font-size: 26px;">APCIe-2032-5 – DAQ PCIe Card – Digital Outputs</h1> appeared first on ADDI-DATA.