CPCI-7500 – DAQ CPCI Card – Serial communication
The CompactPCI serial interface CPCI-7500 is a 4-port serial interface for industrial applications. It is configured by inserting MX modules which the board identifies automatically. Each serial port can be configured individually through modules in the following modes: RS232, RS422, RS485 (with or without optical isolation) and Current Loop (optically isolated). The board is meant for use in the harsh industrial environments, thus the inputs and outputs are protected against short-circuits, fast transients (burst), electrostatic discharge and high-frequency EMI.
NEW: The CPCI-7500 is also available in a special version for operation over an extended temperature range (-40°C to +85°C).
Get a quoteDescription
The card CPCI-7500 is a 4-port serial interface for industrial applications. It is configured by inserting MX modules which the board identifies automatically. Each serial port can be configured individually through modules in the following modes: RS232, RS422, RS485 (with or without optical isolation) and Current Loop (optically isolated). The optically isolated modules allow a protection up to 1000 V for the use in noisy environments where earth loops can occur. Interrupts, addressing and transfer rate are controlled through the BIOS. The I/O lines are protected against short-circuits, fast transients, electrostatic discharge and high-frequency EMI. Each port is supported through a 128-byte FIFO buffer for sending and receiving data which guarantees reliable operation with high data volumes.
Features
- Asynchronous 4-port serial interface
- 4 socket for MX modules
- Modular mounting through MX modules
- Can be configured as RS232, RS422, RS485 with or without optical isolation, 20 mA Current Loop (active, passive), with optical isolation
- Addressing through software
- No jumpers: software configuration
- Automatic module identification
- 128-byte FIFO buffer for sending and receiving data
- Programmable transfer rate
- 5-, 6-, 7- or 8-bit character
- 1, 1½ or 2 stop bits
- Parity: even, odd or none
- Automatic transmitter control for RS485
- Common interrupt
Safety features
- MX modules with optical isolation 1000 V
- Creeping distance IEC 61010-1 (VDE411-1)
- Protection against fast transients (Burst)
- Short-circuit protection for RS422 and RS485
- Internal diagnostic possibility, break, parity, overrun and framing error
Applications
- Industrial communication
- Industrial process control
- Data acquisition
- Multi-user systems
- Multidrop applications
- Modem and printer monitoring
Software
Standard drivers and samples for:
- Linux
- Windows (32/64)
- Real-time with Linux (i.e Xenomai) and Windows (i.e RTX) on request
On request:
Further operating systems, compilers and samples. Driver download: www.addi-data.com/downloads
DOWNLOADS
Drivers
64-bit drivers for Windows and drivers for Linux as well as programming samples are included.
Real-time drivers for Linux and Windows are available on request.
Datasheets
English version French version German version
Manuals
English version German version
