A plane manufacturer wants to carry out flight tests. During the flight, in different time intervals, the following values shall be high-precisely measured (µs range) with sensors and then synchronized with GPS: Ultrasound, pressure, incremental encoders, motor rotational speed, acceleration. The measured values shall then be saved in a text file in table form.
For this application, the real-time system MSX-Box with PCI backplane has been chosen. For the ultrasound and pressure measurement data, the analog I/O board APCI-3120 is used, for the acquisition of the motor rotational speed and the incremental encoders the multifunction board APCI-1710. Through the CAN bus of the MSX-Box, different accelerometers are connected and synchronized with the GPS time. This allows the MSX-Box to align the acquired values with the coordinates. For evaluation purposes, the measured values are saved on an USB flash drive.
Are you looking for advice?
If you have any questions regarding your future projects, you can always contact team of experts.
