CPCIs-1532-12V – DAQ CPCIs Card – Digital Inputs/Outputs

The CompactPCI Serial 32 digital I/O card CPCIs-1532-5V has 16 digital inputs, 12 V, and 16 digital outputs (11 – 36 V). 15 inputs are interruptible. Channel 0 can be used as 16-bit counter input (up to 100 kHz). The card is meant for the industrial I/O board, thus all inputs are filtered and protected against reverse voltage. The nominal voltage has 12V. The inputs and outputs are optically isolated up to 1000 V and protected against fast transients, overvoltage, electrostatic discharge and high-frequency EMI. The card has an extended temperature range from -40 °C up to +85 °C.





  • 16 optically isolated inputs, 12 V incl. 15 interruptible inputs
  • Channel 0 can be used as a 16-bit counter input (up to 100 kHz)
  • Reverse voltage protection
  • Nominal voltage: 12V
  • All inputs are filtered


  • 16 optically isolated outputs, 11 to 36 V
  • Output current per channel 500 mA
  • Total current: 3 A typ. (fused through PTC resistor)
  • Watchdog for resetting the outputs to “0”
  • At Power-On, reset of the outputs to “0”
  • Current limit: ~1.5 A per 8 channels (through PTC)
  • Short-circuit current per output ~1.5 A typ
  • Self-resetting fuse (electronic fuse)
  • Overtemperature and overvoltage protection
  • 24 V power outputs with protection diodes and filters
  • Ext. 24 V voltage supply screened and filtered
  • Shutdown logic, when the external supply voltage drops below 7 V

Timer / Counter

  • 2 timers (12-bit resolution)
  • 1 timer can be used as watchdog

Safety features

  • Optical isolation 1000 V
  • Creeping distance IEC 61010-1
  • Protection against fast transients (burst), overvoltage, electrostatic discharge and high-frequency EMI
  • Separate ground line for inputs and outputs


  • Signal switching
  • Industrial digital I/O controlling
  • PLC coupling
  • Reading of encoder values for process control
  • Interface to electromechanical relays
  • Automatic test equipment
  • ON/OFF monitoring of motors, lights…
  • Watchdog / timer
  • Machine interfacing, …

Software drivers

A CD-ROM with the following software and programming samples is supplied with the board.

Standard drivers for:

  • Linux
  • 32-bit drivers for Windows 8 / 7 / Vista / XP / 2000
  • Signed 64-bit drivers for Windows 8 / 7 / XP
  • Real-time use with Linux and Windows on request

Drivers and samples for the following compilers and software packages:

  • MC .NET, C

On request:

Further operating systems, compilers and samples. Driver download: www.addi-data.com/downloads



Accessories for DAQ Cards

Find all the necessary and compatible accessories:




64-bit drivers, 32-bit drivers for Windows 11/10/8/7/Vista/XP and Linux as well as programming samples are included, real-time drivers for Windows and Linux are available on request.

For Windows For Linux



English version French version German version



English version German version

GREEN for the new products
ORANGE for products in end of life