CPCI-3009

The CompactPCI analog I/O board CPCI-3009 has 16 SE/8 differential inputs, 16-bit, 4 analog outputs, 12-bit, and a reprogrammable counter function module. It is characterised by flexible ­applications,­ high­ accuracy,­ speed­ and­ reliability ­in­ the harsh industrial environment. The counter module allows 32-bit data access and has a frequency of 5 MHz. The following functions are available: Incremental counter, chronos ­for ­frequency­,­ pulse­ width­ and­ period duration measurement, 24 V digital I/O, TTL, RS422. Further functions are available on request.

 

Description

The board CPCI-3009 is a fast multifunction and counter board for the CompactPCI bus. It is characterised by flexible applications, high accuracy, speed and reliability in severe industrial environments. With this board you can put into practice a large range of applications on the same hardware basis thanks to FPGA technology. The board is supplied with a pool of functions allowing a high efficiency on just one board. The functions are programmed using the supplied software. You can adapt the functions of the board to the requirements of your application and change them as required. On request, further counter applications can be adapted per software thanks to the the FPGA. Contact us!

Features

  • CompactPCI 3.3 V or 5 V
  • Can be inserted in PXI systems, with restricted functionalities

Analog inputs:

  • 16 SE or 8 diff. inputs, optically isolated 1000 V
  • Resolution: 16-bit
  • Throughput: 100 kHz
  • Voltage inputs: 0-10 V, ±10 V, 0-5 V, ±5 V, 0-2 V, ±2 V, 0-1 V, ±1 V, 0-20 mA (option) freely programmable through software for each channel
  • Gain PGA x1, x2, x5, x10 freely programmable through software for each channel
  • Version with input range 0-30 V (only SE inputs)

Analog acquisition:

  • Different input modes for the analog acquisition:
    1) Simple mode
    2) Scan modes
    3) Sequence modes
    4) Auto Refresh mode
  • Onboard FIFO
  • PCI-DMA for analog data acquisition

Analog outputs

  • 4 analog outputs, optically isolated
  • 12-bit resolution, setup time 15 µs typ
  • Output voltage after reset: 0 V
  • Each output has its own ground line (without optical isolation)
  • Output voltage range: – 10 V to + 10 V
  • Output current: ± 5 mA
  • Short-circuit current: ± 20 mA

24 V digital I/O

  • 4 digital inputs, 24 V, optically isolated
  • 4 digital outputs, 24 V, optically isolated

Reprogrammable counter function module

  • 32-bit data access
  • Counter component with 32-bit width and 5 MHz counting frequency, signals in RS422 mode

Functions:

  • Incremental counter for the acquisition of incremental encoders (90° phase-shifted signals)
  • Chronos for frequency , pulse width and period duration measurement
  • Digital inputs and outputs, 24 V, TTL, RS422

Further functions on request:

  • SSI synchronous serial interfaces. The SSI function is an interface for systems which allow an absolute position information via serial data transfer.
  • Counter/timer (82C54)
  • Pulse acquisition
  • Velocity measurement
  • PWM (Pulse Width Modulation)
  • Customised functions

Timer/Counter/Watchdog

  • 3 / 3 / 2, 16-bit

Safety features

  • Optical isolation 1000 V min
  • Creeping distance IEC 61010-1
  • Circuit part of the analog acquisition is separated from the circuit part of the digital function
  • Overvoltage protection ± 40 V
  • Protection against high-frequency EMI
  • Input filters
  • Noise neutralisation of the PC supply
  • Connection of the I/O-signals via robust industrystandard D-Sub connector

Software

Calibration tool (Option CAL3120): Do the fine adjustment fast and reliably and save the generated calibration report file. All you need is a highly precise calibration source and a precise digital multimeter (not included in the delivery content)

Standard drivers for:

  • Linux
  • 32-bit drivers for Windows 8 / 7 / Vista / XP / 2000
  • Signed 64-bit drivers for Windows 8 / 7 / XP
  • Real-time use with Linux and Windows on request

On request:

Further operating systems, compilers and samples. Driver download: www.addi-data.com/downloads

ACCESSORIES

Accessories for PC Boards

Find all the necessary and compatible accessories right here

DOWNLOADS

Drivers

64-bit drivers for Windows and drivers for Linux as well as programming samples are included.
Real-time drivers for Linux and Windows are available on request.

For Windows For Linux

 

Datasheets

English version French version German version

 

Manuals

English version


GREEN for the new products
ORANGE for products in end of life

TOP