Description

The intelligent Ethernet data logger MSX-ilog-3016-DIO40 has 16 differential analog inputs, 16-bit, with a transfer rate of 200 kHz as well as 36 digital inputs, 24 V. Four additional 24 V digital outputs are available for the switching of actuators and the transfer of signals. The parametering and visualisation of the measured
values are carried out via an integrated web site which is accessible over a standard browser (Internet Explorer, Firefox) with Java from version 1.6x. Thus no additional software installation is needed. The acquisition, visualisation and data storage take place automatically

Features

• 64-bit MIPS processor
• 128 GB memory (SSD hard disk), data remains stored at power loss
• The buffered real-time clock keeps the system time even without supply voltage
• Robust metal housing
• Power Save Mode: Reduced power consumption when no acquisition runs

Analog inputs

• 16 diff. inputs, 16-bit, 37-pin D-Sub connector
• Sampling frequency max. 200 kHz
• Input ranges: 0-10 V, ±10 V, 0-5 V, ±5 V, 0-2 V, ±2 V, 0-1 V, ±1 V
• Current inputs: 0-20 mA (option) can be combined freely with voltage inputs

Digital inputs and outputs

• 36 opto-isolated digital inputs, 24 V
• 4 opto-isolated digital outputs, 5 V to 30 V, open collector
• Output current for each channel max. 50 mA typ
• 2x 37-pin D-Sub connector (1x 32 digital inputs, 1x 8 digital I/O)

Acquisition

• Automatic acquisition and recording of measured data
• Conversion of measured data into real values e. g. mm, bar, temperature, etc.
• Acquisition of virtual channels

Trigger

• Acquisition triggered via hardware or software
• 24 V hardware trigger (external)
• Trigger through timer (internal)
• Threshold trigger (when the defined level of the analog inputs is exceeded)
• Trigger from external software (Software trigger)
• Manual trigger (web interface)
• Optional pre-trigger (records events which have occurred before the trigger event)

Alarm functions

• Upper and lower limits of channels
• Data storage depending on alarms
• Can be combined with the pre-trigger

Analysis

• Online graphical analysis of measured data
• Data export (xml, csv)

Safety features

• Optical isolation 1000 V
• Input filters
• Overvoltage protection ± 40 V
• Internal temperature monitoring

Applications

• Data logger
• Long-term data recording
• Monitoring of infrastructure

Interfaces

• Fast 24 V trigger input
• Fast Ethernet (100 MBit/s)

Communication interfaces

• Web server (configuration and monitoring)
• Data server (TCP/IP or UDP socket) for sending acquisition data