APCI-3702

The PCI length measurement board APCI-3702 is designed for the simultaneous acquisition of 5 half-bridge or LVDT transducers with a 16-bit resolution. Furthermore, it has 16 digital inputs and outputs, optically isolated. It is suited for dynamic measurement, e.g. for measuring moving parts or applications with time-critical measurement cycles – especially in test equipment with several sensors. 64-bit drivers for Windows 8/7/Vista/XP and Linux as well as programming samples are included, real-time drivers for Windows and Linux are available on request.

Categories: , ,

Description

The PCI length measurement board APCI-3702 is designed for the simultaneous acquisition of 5 half-bridge or LVDT transducers. It operates with a 16-bit resolution.
It is suited for dynamic measurement, e.g. for measuring moving parts or applications with time-critical measurement cycles – especially in test equipment with several sensors. The calibration tool SET3701 includes a data base with pre-calibrated transducers. It guides you through each step of the installation beginning with the selection of a transducer up to testing the channels.

 

Features

  • PCI interface to the 32-bit data bus, 3.3 V or 5 V
  • Acquisition of 5 inductive transducers (half-bridge, LVDT)
  • 16-bit resolution
  • Sampling rate depending on the transducer: 2-20 kHz
  • Example for TESA transducers GT21: 13.951 kHz per channel, 0.072 ms for one sequence of up to 5 channels
  • Measuring frequency through software programmable: 2-20 kHz
  • Conversion triggered through software, digital input or timer
  • End of conversion through software and/or interrupt
  • PCI-DMA access
  • Onboard FIFO
  • Sequence RAM
  • 16 digital inputs and outputs, optically isolated, 24 V
  • Connection of the transducer through external box PX3701-8. The box type depends on the transducers used.
    Please order separately.
  • Software operation
  • Automatic setting of the input levels (gain and offset) according to the transducer sensitivity
  • Tool for individual database-managed calibration of the transducers
  • Database for connecting/calibrating a large range of industry-standard transducers:
    • Solartron • Tesa • Marposs • Schlumberger
    • Peter & Hirt • Mahr • RDP • Schaevitz
    • SMPR Controle
    • Further transducers like for example Horst Knäbel can be calibrated on request.

Safety features

  • Input filters
  • Diagnostic function in case of short-circuits or line break

 

Applications

  • Gear wheel control
  • Gauge block
  • Acquisition of sensor data
  • Quality control
  • Industrial process control
  • Automatic parts control
  • R&D instrumentation

 

Software

  • Easy transducer calibration
  • Step by step from the transducer selection up to testing each single channel.
  • Database with more than 50 pre-calibrated transducers
  • Update of the APCI-3702 firmware

Standard drivers for :

  • Linux
  • 32-bit drivers for Windows 8 / 7 / Vista / XP / 2000
  • Signed 64-bit drivers for Windows 8 / 7 / XP
  • Real-time use under Linux and Windows on request

Drivers for the following compilers and software packages:

  • .NET
  • Microsoft VC++ • Borland C++ • Visual Basic • Delphi
  • LabVIEW • LabWindows/CVI

ADDIPACK functions:

  • Transducer • Timer • Digital input • Digital output

On request:

Further operating systems, compilers and samples. Driver download: www.addi-data.com/downloads

ACCESSORIES

Accessories for PC Boards

Find all the necessary and compatible accessories right here

DOWNLOADS

Datasheets

English version

NEW PRODUCT



GREEN for the new products
ORANGE for products in end of life

TOP